Determination of Surface Roughness and Accuracy of Alginate Impression Material Disinfected by Immersion
Main Article Content
Abstract
Background: This study was conducted to evaluate the surface roughness and dimensional accuracy of commercially obtainable alginate impression material in terms of imbibition after immersion in two different media. Materials and method: Two disinfecting agents, ethanol 70% and povidone-iodine 4%, were used to access the dimensional accuracy and surface roughness of alginate impression material. Weights of specimen discs of alginate impressions were measured before and immediately after immersion to gain a measure of imbibition. For surface roughness, disinfected specimens rectangle was examined before and after disinfection. Results: Minimal changes in weight were observed after disinfection, but a statistically non-significant difference was found before and after immersion. It did not affect the surface roughness of alginate impression material Conclusion: Disinfection of alginate impression material with ethanol and povidone iodine had no significant effect on dimensional accuracy and surface roughness.
Downloads
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licenses and Copyright
The following policy applies in The Journal of Baghdad College of Dentistry (JBCD):
# JBCD applies the Creative Commons Attribution (CC BY) license to articles and other works we publish. If you submit your paper for publication by JBCD, you agree to have the CC BY license applied to your work. Under this Open Access license, you as the author agree that anyone can reuse your article in whole or part for any purpose, for free, even for commercial purposes. Anyone may copy, distribute, or reuse the content as long as the author and original source are properly cited. This facilitates freedom in re-use and also ensures that JBCD content can be mined without barriers for the needs of research.
# If your manuscript contains content such as photos, images, figures, tables, audio files, videos, etc., that you or your co-authors do not own, we will require you to provide us with proof that the owner of that content (a) has given you written permission to use it, and (b) has approved of the CC BY license being applied to their content. We provide a form you can use to ask for and obtain permission from the owner. If you do not have owner permission, we will ask you to remove that content and/or replace it with other content that you own or have such permission to use.Don't assume that you can use any content you find on the Internet, or that the content is fair game just because it isn't clear who the owner is or what license applies.
# Many authors assume that if they previously published a paper through another publisher, they own the rights to that content and they can freely use that content in their paper, but that’s not necessarily the case, it depends on the license that covers the other paper. Some publishers allow free and unrestricted re-use of article content they own, such as under the CC BY license. Other publishers use licenses that allow re-use only if the same license is applied by the person or publisher re-using the content. If the paper was published under a CC BY license or another license that allows free and unrestricted use, you may use the content in your JBCD paper provided that you give proper attribution, as explained above.If the content was published under a more restrictive license, you must ascertain what rights you have under that license. At a minimum, review the license to make sure you can use the content. Contact that JBCD if you have any questions about the license. If the license does not permit you to use the content in a paper that will be covered by an unrestricted license, you must obtain written permission from the publisher to use the content in your JBCD paper. Please do not include any content in your JBCD paper which you do not have rights to use, and always give proper attribution.
# If any relevant accompanying data is submitted to repositories with stated licensing policies, the policies should not be more restrictive than CC BY.
# JBCD reserves the right to remove any photos, captures, images, figures, tables, illustrations, audio and video files, and the like, from any paper, whether before or after publication, if we have reason to believe that the content was included in your paper without permission from the owner of the content.
How to Cite
References
Oancea L, Bilinsche L G.,Burlibasa M.et al. Effects of disinfectant solutions incorporated in dental stone on setting expansion, compression and flexural strength of dental models. Rom Biotechnol Lett. 2020; 25(6): 2095-2102.
Ozdogan A and Ozmen MF. Effect of Two Different Disinfectant Agents on Wettability of Elastomeric Impression Materials.2020,9(3):130-138.
Zahid SH, Qadir S, Zehra Bano N, Qureshi SW, Kaleem M. Evaluation of the dimensional stability of alginate impression materials immersed in various disinfectant solutions.Pakistan Oral and Dental Journal.2017; April-June,37(2);371-76.
Celebi H, Bukukerkmen EB, Torlak E.Disinfection of polyvinylsilaxone impression material by gaseous ozone. J Prosthet Dent.2018;120(1):138-43.
Karaman T, Oztekin F, Tekin S, Effect of application time of two different disinfectants on the surface roughness of an elastic impression material. J of clinical and diagnosis research.2020; Jul,14(7): ZC10-ZC13.
Omidkhoda M,Hasanzadeh N,Soleimani F,Shafaee H. Antimicrobial and physical properties of alginate impression material incorporated with silver nanoparticles.Dent Res J.2019;Nov-Dec,16(6):372-376.
Mostafavi A, Koosha S, Amjad M.Effect of disinfection on the surface roughness of dental casts retrieved from addition silicon impressions. J Res Dentomaxillofac Sci.2018;3(1):27-33.
Soganci G,Cinar D,Caglar A,Yagiz A . 3D evaluation of the effect of disinfectants on dimensional accuracy and stability of two elastomeric impression materials.Dent Mater J.2018;37(4):675-84.
Mushtaq MA and Ullah Khan MW. An Overview of Dental Impression Disinfection TechniquesA Literature Review.JPDA.2018;Oct-Dec,27(4):207-11.
Sumantri D and Maulida CH.Inhibition effect of hydrocolloid irreversible alginate on soaking spray using aloevera juice.Intisari Sains Medis,DOAJ.2018 ;9(3):24-29.
Kotha SB, Ramakrisknaiah R, Devang Divakar D, Celur SL, Qasim S, Matinlinna JP.Effect of disinfection and sterilization on tensile strength, surface roughness, and wettability of elastomers. J Investing Clin Dent.2017 Nov; 8(4):1-6.
Aalaei SR,Gangi-Khanloo,Gholami F.Effect ofStorage period on Dimensional stability of Alginplus and Hydrogum 5.Journal of Dentistry of Tehran University of Medical Sciences.2017;14(1):p31-39.
Demajo JK, Cassar V, Farrugia C, Millan-Sango,D, Sammut C, Valdramidis V, et al. Effectiveness of Disinfectants on Antimicrobial and Physical Properties of Dental Impression Materials. Int J Prosthodont. 2016 Jan-Feb;29(1):63-7.
Saji P, Mohamed R, Noufal PK, Sesha Reedy P, Jain AR, Varma A, Gounder R.Compartive evaluation of the influence of cast hardening agents on surface abrasion, surface hardness and surface detail reproduction properties of refractory investment materials. Biomedical and `Pharmacology Journal.2017;10(3):1517-1524.
Dreesen K,Kellens A, Wevers M, Thilakarathne PJ, Willems G.The influenceof mixing methods and disinfectant on the physical properties of alginate impression materials.European Journal of Orthodontics.2013;35:pp.381-87.
Sharif RA, Abdelaziz KM, Alshahrani NMZ, Almutairi FS, Alaseri MS, Lotfy AbouzeidH,. Elagib MF. Dimensional Stability and Surface Details Reproduction of Two Extended-Pour Alginate Materials: A Function of Chemical Disinfection and Storage Time. An In- Vitro Study. Research article.JAN 2021;DOI: https://doi.org/10.21203/rs.3.rs-41597/v1
Rentzia A, Coleman DC, O´Donnall MJ, Dowling HA, O´Sullivan M. Disinfection procedure: their efficacy and effect on dimensional accuracy and surface quality of an irreversible hydrocolloid impression material. J Dent. 2011;39(2):133–40.
Malaviya N, Shrestha A.Compartive Evaluation of Surface Detail Changes and Compressive Strength of Gypsum Casts and Dies After Immerssion in Hypochlorite Soluttion and Microwave Irradiation.An in Vitro Study.IJCMR.2016;3(6):1547-51.
Doddamani S, Patil RA, Gangadhar SA. Effcacy of various spray disinfectants on irreversible hydrocolloid impression materials: an in vitro study. Indian J Dent Res. 2011;22(6):764–9.
Kotsiomiti E, Tzislla A, Hatjivasiliou K.Accuracy and stability of impression materials subjected to chemical disinfection . a literature review.Journal of Oral Rehablitation.May 2008; 35(4):291-9