Effect of adding titanium dioxide nanoparticles on anti-microbial activity and surface detail reproduction of dental alginate
Main Article Content
Abstract
Most dental works require a diagnostic impression; alginate is contemplated as the most popular material used for this purpose. Titanium dioxide nanoparticles show evidence of antimicrobial activity in the recent era, for this purpose, this study aimed to evaluate the effect of adding Titanium dioxide nanoparticles on antimicrobial activity and surface detail reproduction of alginate impression material. Materials and methods: Titanium dioxide nanoparticles (purity = 99%, size= 20nm) was added to alginate at three different concentrations (2%, 3% and 5%). 84 samples were prepared in total. Samples were tested for antimicrobial activity using a disc diffusion test, and surface detail reproduction was done using (ISO 21563:2021). One-way ANOVA and independent sample t-test were used for data analysis through SPSS software. Results: for the antimicrobial test, inhibition zones for Streptococcus mutans and Candida albicans showed significant changes concerning the alteration in Titanium dioxide nanoparticle concentrations. The inhibition zone significantly increased with an increase in the percentage of Titanium dioxide nanoparticles. The mean of the inhibition zone for S. mutans was superior to C. albicans and the difference was statistically significant. Regarding surface detail reproduction, the control group, 2% and 3% groups manifested very similar results, only the group to which 5% of Titanium dioxide nanoparticles were added showed a decline in detail reproduction when compared to the other three groups. Conclusion: Within the limitation of this study, we can conclude that the antimicrobial activity against S mutans and C. albicans were significantly increased in modified groups, and this escalation was directly linked to the increase in Titanium dioxide nanoparticles concentration. In contrast, the surface detail reproduction was decreased when adding 5% Titanium dioxide nanoparticles to alginate.
Received date: 09-05-2022
Accepted date: 10-06-2022
Downloads
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licenses and Copyright
The following policy applies in The Journal of Baghdad College of Dentistry (JBCD):
# JBCD applies the Creative Commons Attribution (CC BY) license to articles and other works we publish. If you submit your paper for publication by JBCD, you agree to have the CC BY license applied to your work. Under this Open Access license, you as the author agree that anyone can reuse your article in whole or part for any purpose, for free, even for commercial purposes. Anyone may copy, distribute, or reuse the content as long as the author and original source are properly cited. This facilitates freedom in re-use and also ensures that JBCD content can be mined without barriers for the needs of research.
# If your manuscript contains content such as photos, images, figures, tables, audio files, videos, etc., that you or your co-authors do not own, we will require you to provide us with proof that the owner of that content (a) has given you written permission to use it, and (b) has approved of the CC BY license being applied to their content. We provide a form you can use to ask for and obtain permission from the owner. If you do not have owner permission, we will ask you to remove that content and/or replace it with other content that you own or have such permission to use.Don't assume that you can use any content you find on the Internet, or that the content is fair game just because it isn't clear who the owner is or what license applies.
# Many authors assume that if they previously published a paper through another publisher, they own the rights to that content and they can freely use that content in their paper, but that’s not necessarily the case, it depends on the license that covers the other paper. Some publishers allow free and unrestricted re-use of article content they own, such as under the CC BY license. Other publishers use licenses that allow re-use only if the same license is applied by the person or publisher re-using the content. If the paper was published under a CC BY license or another license that allows free and unrestricted use, you may use the content in your JBCD paper provided that you give proper attribution, as explained above.If the content was published under a more restrictive license, you must ascertain what rights you have under that license. At a minimum, review the license to make sure you can use the content. Contact that JBCD if you have any questions about the license. If the license does not permit you to use the content in a paper that will be covered by an unrestricted license, you must obtain written permission from the publisher to use the content in your JBCD paper. Please do not include any content in your JBCD paper which you do not have rights to use, and always give proper attribution.
# If any relevant accompanying data is submitted to repositories with stated licensing policies, the policies should not be more restrictive than CC BY.
# JBCD reserves the right to remove any photos, captures, images, figures, tables, illustrations, audio and video files, and the like, from any paper, whether before or after publication, if we have reason to believe that the content was included in your paper without permission from the owner of the content.
How to Cite
References
Hamalian, T. A., Nasr, E., Chidiac, J.J. Impression Materials in Fixed prosthodontics: influence of choice on clinical proce-dure. J Prosthodont. 2011; 20(2):153-60.
Hansson, O., Eklund, J. A historical review of hydrocolloids and an investigation of the dimensional accuracy of the new alginates for crown and bridge impressions when using stock trays. Swed Dent J. 1984; 8(2): 81-95.
Cervino, G., Fiorillo, L., Herford, A., et al. Alginate Materials and Dental Impression Technique: A Current State of the Art and Application to Dental Practice. Mar Drugs. 2018; 17(1): 18.
Glenner, R.A. Dental impressions. J Hist Dent. 1997; 45(3): 127–30.
Samra, R.K. Bhide, S.V. Efficacy of Different Disinfectant Systems on Alginate and Addition Silicone Impression Materials of Indian and International Origin: A Comparative Evaluation. J Indian Prosthodont Soc. 2010; 10(3): 182–189.
Amalan , K., Ginjupalli, A. Upadhya, N. Evaluation of properties of irreversible hydrocolloid impression materials mixed with disinfectant liquids. Dent Res J (Isfahan). 2013; 10(1): 65-73.
Jenning, K.J. Samaranayake, L.P. The persistence of microorganisms on impression materials following disinfection. Int J Prosthodont. 1991; 4(4): 382-7.
Wang, J., Wan, Q., Chao, Y., et al. A self-disinfecting irreversible hydrocolloid impression material mixed with chlorhexidine solution. Angle Orthod. 2007; 77(5): 894-900.
Mitra, S.B. Nanoparticles for dental materials: synthesis, analysis, and applications. In: Emerging nanotechnologies in den-tistry. Elsevier; 2012. p. 15–33.
Figueroa,, L. A., Morales-Luckie., R. A., Scougall-Vilchis, R.J., et al. Synthesis, characterization and antibacterial activity of copper, nickel and bimetallic Cu–Ni nanoparticles for potential use in dental materials. Progress in Natural Science: Materials International.20114; 24(4): 321-328.
Khan I, Saeed K, Khan I.. Nanoparticles: Properties, applications and toxicities. Arab J Chem. 2019; 12(7): 908-931.
Jefferson, K.K. What drives bacteria to produce a biofilm?. FEMS Microbiology Letters. 2004; 236(2): 163–173.
Al-Hawezi, S.S.Q. The effect of addition of titanium dioxide nanofillers on the properties of flowable composite resin (in vitro study). Ph.D.Thesis. Hawler Medical University, Iraq, 2021.
Sodagar, A., Akhoundi, M.S.A., Bahador, A, et al. Effect of TiO2 nanoparticles incorporation on antibacterial properties and shear bond strength of dental composite used in Orthodontics. Dent Press J Orthod. 2017; 22(5): 67–74.
Ahmed, A.Q. The influence of titanium dioxide nanoparticles (TiO2NPS) incorporation into heat cured soft denture lining material on Candida albicans adherence and some other properties. M.Sc thesis. University of Baghdad, Iraq, 2018..
Whitfield, P., Mitchell, L. X-ray diffraction analysis of nanoparticles: Recent developments, potential problems and some solutions. Int J Nanosci. 2004; 3(6): 757–63.
Bunaciu, A.A., UdriŞTioiu, E.G. Aboul-Enein, H.Y. X-ray diffraction: instrumentation and applications. Crit Rev Anal Chem 2015; 45(4): 289–99.
Ruparelia, J.P., Chatterjee, A.K., Duttagupta, S.P., et al. Strain specificity in antimicrobial activity of silver and copper na-noparticles. Acta Biomater. 2008; 4(3): 707–16
Skocaj, M., Filipic, M., Petkovic, J., et al. Titanium dioxide in our everyday life; is it safe?. Radiol Oncol. 2011; 45(4): 227-247.
Abdelrahman, H.K. Al-Sammaraie, S.A.S. Effect of addition of Magnesium Oxide Nanoparticles on surface hardness and tensile bond strength of denture soft liner. IJFMT. 2020; 14(3): 2479-2485.
Monteiro, D.R., Gorup, L.F., Takamiya, A.S., et al. Silver distribution and release from an antimicrobial denture base resin containing silver colloidal nanoparticles. J Prosthodont. 2012; 21(1): 7–15.
Pfaller, M.A. National Committee for Clinical Laboratory Standards. Reference method for broth dilution antifungal sus-ceptibility testing of yeasts: approved standard. Wayne, Pa.: National Committee for Clinical Laboratory Standards; 2002.
Coyle, M.B. American Society for Microbiology. Manual of antimicrobial susceptibility testing. Burnaby, BC: BCIT Imaging Services; 2012.
Chneider, C.A., Rasband, W.S., Eliceiri, K.W. NIH Image to ImageJ: 25 years of image analysis. Nat Methods. 2012; 9(7): 671–5.
Bykowski, T. Stevenson, B. Aseptic technique. Current Protocols Microbiol. 2008; 11(1): A-4D.
Omer, R.A. Ikram, F.S. Evaluation of Antibacterial Effect of Silver and Copper Oxide Nanoparticles in Denture Base Material Against Streptococcus mutans and Escherichia coli. Saudi Dental J. 2019; 6(1):13–20.
ISO 21563: 2021. Dentistry-Hydrocolloid Impression Material. Geneva, Switzerland: International Organization for Stand-ardization.
American Dental Association Specification No. 19 .Elastomeric Impression Materials. 2004s
Owen, C.P. An investigation into the compatibility of some irreversible hydrocolloid impression materials and dental gyp-sum products: Part II. A refined discriminatory procedure. J Oral Rehabil. 1986; 13(2):147–62.
ISO 4823: 2021. Dentistry-Elastomeric Impression Material. Geneva, Switzerland: International Organization for Standard-ization.
Gupta, S., Rani, S., Garg, S. Infection control knowledge and practice: a cross-sectional survey on dental laboratories in dental institutes of North India. J Indian Prosthodont Soc 2017; 17: 348- 354.
Courrol, D.S., Lopes, C.R.B., Cordeiro, T.S., et al. Optical properties and antimicrobial effects of silver nanoparticles synthe-sized by femtosecond laser photoreduction. Optics Laser Technol. 2018; 103: 233–8.
de Castro DT, Kreve S, Oliveira VC, et al. Development of an impression material with antimicrobial properties for dental application. J Prosthodont. 2019 Oct;28(8):906-12.
Rajendran, V., Suma, K., Ali, S.A., et al. Antimicrobial Efficacy of Irreversible Hydrocolloid Impression Impregnated with Silver Nanoparticles Compared to Surface Disinfected Impressions An In vivo Study.
J Pharm Bioallied Sci. 2021; 13(1): S532-6.
Hu, H., Fan, X., Yin, Y., et al. Mechanisms of titanium dioxide nanoparticle-induced oxidative stress and modulation of plasma glucose in mice. Environ Toxicol. 2019, 34(11): 1221-1235.
Seil, J.T., Webster, T.J. Antimicrobial applications of nanotechnology: methods and literature. Int J Nanomed, 2012; 7: 2767-2781
Sondi, I., Salopek-Sondi, B. Silver nanoparticles as antimicrobial agent: a case study on E. coli as a model for Gram-negative bacteria. JCIS Open. 2004; 275(1):177–82.
Abbaszadegan, A., Ghahramani, Y., Gholami, A., et al. The effect of charge at the surface of silver nanoparticles on antimi-crobial activity against gram-positive and gram-negative bacteria: a preliminary study. J Nanomater. 2015; 16(1): 53.
Ahmad, N.S., Abdullah, N., Yasin, F.M. Antifungal activity of titanium dioxide nanoparticles against Candida albicans. Bio Res. 2019; 14(4): 8866-8878.
Kermani, S.A., Salari, S., Almani, P.G.N. Comparison of antifungal and cytotoxicity activities of titanium dioxide and zinc oxide nanoparticles with amphotericin B against different Candida species: In vitro evaluation. J Clin Lab Anal. 2021; 35: e23577.
Haghighi, F., Mohammadi, R.S., Mohammadi, P., et al. Antifungal activity of TiO2 nanoparticles and EDTA on Candida albicans biofilms. Infection, Epidemiology and Microbiology. 2013; 1(1): 33-8
Kamikawa, Y., Hirabayashi, D., Nagayama, T., et al. In vitro antifungal activity against oral Candida species using a denture base coated with silver nanoparticles. J Nanomater. 2014; 2014: 48.
Manar, J. Alginate as impression material. J Appl Oral Sci. 2018; 4(3): 300-3.
Omidkhoda, M., Hasanzadeh, N., Soleimani, F. Antimicrobial and physical properties of alginate impression material in-corporated with silver nanoparticles. Dent Res J. 2019; 16(6): 372-376.
Watson S, Beydoun D, Scott J, et al. Preparation of nanosized crystalline TiO 2 particles at low temperature for photocatal-ysis. J. Nanopart Res. 2004 Jun;6:193-207.
American Dental Association Specification No. 18. dental alginate impression materials. 1992.