Evaluating the influence of Ti6Al4V alloy particles on mechanical properties of heat-cured PMMA
Main Article Content
Abstract
Background: Titanium alloy (Ti6Al4V) is considered a promising material for prosthetic dental applications due to its superior density, high strength, improved corrosion resistance and superior biocompatibility. Due to the low strength and brittleness of the practicable denture foundation material in heat-cured acrylic resin, improving the strength properties is a crucial issue. The present study aimed to evaluate the influence of Ti6Al4V alloy particles on the tensile strength transverse strength, and the surface hardness of heat-cured PMMA as a base material. Materials and methods: A total of 75 specimens were prepared by combining heat-cured acrylic resin with Ti6Al4V additive particles (0.5, 1, 1.5, and 2 wt. % respectively). Each group was subdivided into three subgroups according to the samples subjected to the test (n = 25), tensile strength; transverse strength; and surface hardness. Results: The result showed a significant difference (P= 0.007) in all tested groups. The results showed that the addition of Ti6Al4V particles to heat-cured material considerably increased the tensile strength, transverse strength, and surface hardness-a compared to the untreated control specimens. Conclusion: It was found that increasing the weight concentration (wt.) of Ti6Al4V particles improved the tensile strength, transverse strength, and surface hardness of heat-cured PMMA specimens.
Downloads
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licenses and Copyright
The following policy applies in The Journal of Baghdad College of Dentistry (JBCD):
# JBCD applies the Creative Commons Attribution (CC BY) license to articles and other works we publish. If you submit your paper for publication by JBCD, you agree to have the CC BY license applied to your work. Under this Open Access license, you as the author agree that anyone can reuse your article in whole or part for any purpose, for free, even for commercial purposes. Anyone may copy, distribute, or reuse the content as long as the author and original source are properly cited. This facilitates freedom in re-use and also ensures that JBCD content can be mined without barriers for the needs of research.
# If your manuscript contains content such as photos, images, figures, tables, audio files, videos, etc., that you or your co-authors do not own, we will require you to provide us with proof that the owner of that content (a) has given you written permission to use it, and (b) has approved of the CC BY license being applied to their content. We provide a form you can use to ask for and obtain permission from the owner. If you do not have owner permission, we will ask you to remove that content and/or replace it with other content that you own or have such permission to use.Don't assume that you can use any content you find on the Internet, or that the content is fair game just because it isn't clear who the owner is or what license applies.
# Many authors assume that if they previously published a paper through another publisher, they own the rights to that content and they can freely use that content in their paper, but that’s not necessarily the case, it depends on the license that covers the other paper. Some publishers allow free and unrestricted re-use of article content they own, such as under the CC BY license. Other publishers use licenses that allow re-use only if the same license is applied by the person or publisher re-using the content. If the paper was published under a CC BY license or another license that allows free and unrestricted use, you may use the content in your JBCD paper provided that you give proper attribution, as explained above.If the content was published under a more restrictive license, you must ascertain what rights you have under that license. At a minimum, review the license to make sure you can use the content. Contact that JBCD if you have any questions about the license. If the license does not permit you to use the content in a paper that will be covered by an unrestricted license, you must obtain written permission from the publisher to use the content in your JBCD paper. Please do not include any content in your JBCD paper which you do not have rights to use, and always give proper attribution.
# If any relevant accompanying data is submitted to repositories with stated licensing policies, the policies should not be more restrictive than CC BY.
# JBCD reserves the right to remove any photos, captures, images, figures, tables, illustrations, audio and video files, and the like, from any paper, whether before or after publication, if we have reason to believe that the content was included in your paper without permission from the owner of the content.
How to Cite
References
Patil SS, Patil AG, Kanathila H. An in vitro study to evaluate and compare the effects of various polymerisation cycles on the physical and mechanical properties of Heat cure Polymethylmethacrylate resin. Eur Chem Bull 2023; 12(3), 983-998
Pires-de-Souza FdCP, Panzeri H, Vieira MA, Garcia LdFR, Consani S. Impact and fracture resistance of an experimental acrylic polymer with elastomer in different proportions. Mat Res 2009; 12(4):415-8.
Rakhshan V. Marginal integrity of provisional resin restoration materials: A review of the literature. Saudi J Dent Rese 2015; 6(1):33-40.
Han Z, Zhu B, Chen R, Huang Z, Zhu C, Zhang X. Effect of silver-supported materials on the mechanical and antibacterial properties of reinforced acrylic resin composites. Materials & Design (1980-2015) 2015; 65:1245-52.
Shirkavand S, Moslehifard E. Effect of TiO2 nanoparticles on tensile strength of dental acrylic resins. J Dent Res Dent Clin Dent Prospects 2014; 8(4):197.
Jagger D, Jagger R, Allen S, Harrison A. An investigation into the transverse and impact strength ofhigh strength'denture base acrylic resins. J Oral Rehabil 2002; 29(3):263-7.
Narendra R, Reddy NS, Reddy SD, Purna CS, Shekar MC, Balasubramanyam S. A comparative evaluation of impact strength of conventionally heat cured and high impact heat cured polymethyl methacrylate denture base resins: an in vitro study. j Cont Dent Prac 2013; 14(6):1115.
Dhir G, Berzins DW, Dhuru VB, Periathamby AR, Dentino A. Physical properties of denture base resins potentially resistant to Candida adhesion. J Prosthodont 2007; 16(6):465-72.
Nam KY, Lee CH, Lee CJ. Antifungal and physical characteristics of modified denture base acrylic incorporated with silver nanoparticles. Gerodontology 2012; 29(2):e413-e9.
Omidi M, Fatehinya A, Farahani M, Akbari Z, Shahmoradi S, Yazdian F, et al. Characterization of biomaterials. 2017: 97-115.
Altaie SF. Tribological, microhardness and color stability properties of a heat-cured acrylic resin denture base after reinforcement with different types of nanofiller particles. Dent Med Probl 2023; 60:295-302.
Atallah W, AlFuraiji N, Hussein OH. Nanocomposites for Prosthetic Dental Technology: A Systemic Review. Journal of Techniques 2023; 5(1):129-36.
Li Y-H, Shang X-Y, Li Y-J. Fabrication and characterization of TiMoCu/PMMA composite for biomedical application. Materials Letters 2020; 270:127744.
Kavitha Janardanan DV. Effect of titanium dioxide nanoparticles incorporation on tensile and impact strength in two different acrylic denture base resins. Int Dent J Students Res 2020; 8(2):65-74.
Kodaira A, Koizumi H, Hiraba H, Takeuchi Y, Koike M, Shimoe S. Bonding of resin luting materials to titanium and titanium alloy. J of Oral Sci 2022; 64(3):181-4.
Wei G, Tan M, Attarilar S, Li J, Uglov VV, Wang B, et al. An Overview of Surface Modification, A Way Toward Fabrication of Nascent Biomedical Ti-6Al-4V Alloys. J Mater Res Tech 2023; 24: 5896-5921.
Ata SO, Canan A, Mumcu E. The effects of metal nanoparticles incorporation on the mechanical properties of denture base acrylic resin. Eur Oral Res 2023;57(1):36-40.
Alrahlah A, Fouad H, Hashem M, Niazy AA, AlBadah A. Titanium oxide (TiO2)/polymethylmethacrylate (PMMA) denture base nanocomposites: mechanical, viscoelastic and antibacterial behavior. Materials 2018; 11(7):1096.
Azeez ZA, Kareem RA, Abdulwahhab SS. The effect of nano titanium oxide particle incorporation on characteristic of denture base material. Materials Today: Proceedings 2021; 42:2102-5.
Patra N, Barone AC, Salerno M, Caputo G, Cozzoli D, Athanassiou A, editors. Thermal and mechanical characterization of PMMA TiO2 nanocomposites. Adv Mater Res 2009: 67:209-214.
Özcan M, Hämmerle C. Titanium as a reconstruction and implant material in dentistry: advantages and pitfalls. Materials 2012; 5(9):1528-45.
Guo S, Li Y, Gu J, Liu J, Peng Y, Wang P, et al. Microstructure and mechanical properties of Ti6Al4V/B4C titanium matrix composite fabricated by selective laser melting (SLM). J Mat Res and Techn 2023; 23:1934-46.
Cui C, Hu B, Zhao L, Liu S. Titanium alloy production technology, market prospects and industry development. Materials & Design 2011; 32(3):1684-91.
Donachie MJ. Titanium: a technical guide: ASM international; 2nd edition, 2000.
Veiga C, Davim J, Loureiro A. Properties and applications of titanium alloys: a brief review. Rev Adv Mater Sci 2012; 32(2):133-48.
Weaver JS, Kalidindi SR, Wegst UG. Structure-processing correlations and mechanical properties in freeze-cast Ti-6Al-4V with highly aligned porosity and a lightweight Ti-6Al-4V-PMMA composite with excellent energy absorption capability. Acta Materialia 2017; 132:182-92.
Sirvent P, Garrido MÁ, Sharp J, Rainforth WM, Poza P. Improving the oscillating wear response of cold sprayed Ti-6Al-4V coatings through a heat treatment. Surf Coat Tech 2020; 399:126128.
ISO I. 20795-1 Dentistry-Denture Base Polymers. ISO: Geneva, Switzerland. 2008.
Polyzois GL, Tarantili PA, Frangou MJ, Andreopoulos AG. Fracture force, deflection at fracture, and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber. J Prosthet Dent 2001; 86(6):613-9.
Ahmed MA, El-Shennawy M, Althomali YM, Omar AA. Effect of titanium dioxide nano particles incorporation on mechanical and physical properties on two different types of acrylic resin denture base. World J Nano Sci Engineer 2016; 6(3):111-9.
Tandra E, Wahyuningtyas E, Sugiatno E. The effect of nanoparticles TiO2 on the flexural strength of acrylic resin denture plate. Padjadjaran J Dent 2018; 30(1):35-40.
O'Brien WJ, editor. Dental materials and their selection. Chicago: Quintessence; 2002.