Exploring palatal dimensions in a sample of kurdish edentulous population: influence of age, gender and duration of edentulism
Main Article Content
Abstract
Background: Complete denture construction requires accurate measurements of the edentulous palate to ensure optimal fit and function.
This study aimed to evaluate palatal dimensions in a sample of Kurdish edentulous population and determine the effects of age, gender and duration of edentulism on these measurements. Materials and Methods: Maxillary stone models were obtained from 51 edentulous participants, comprising 26 women and 25 men aged 40–75 years. Palatal linear measurements, including length, width and height, along with ratios involving palatal, rugae, and incisive papilla area size, were evaluated and correlated with age, sex and the edentulous duration. Digital caliber and ImageJ software were employed for accurate linear measurements and size evaluations. Results: A significant sex-related impact was found on the palatal size in middle palate width and posterior height, with men exhibiting higher values than women (45.29 and 12.47 mm vs. 43.2 and 10.78 mm). Palatal ratios remained consistent across both sexes. Notably, an increase in palatal height was observed with longer durations of edentulism (H1–H3 increased from 6.68, 10.42 and 10.07 mm, respectively, to 8.30, 12.72 and 12.87 mm, respectively). Conclusions: Men demonstrated significantly higher values in middle palatal width, posterior height and palate area size than women. This study underscores the influence of age and edentulous duration on palatal dimensions, providing valuable data to guide clinicians in their dental rehabilitation planning. Palatal height indices were identified as a valuable tool for exploring denture construction.
Received date: 10-11-2024
Accepted date: 02-02-2025
Published date: 15-03-2025
Downloads
Article Details
Issue
Section

This work is licensed under a Creative Commons Attribution 4.0 International License.
Licenses and Copyright
The following policy applies in The Journal of Baghdad College of Dentistry (JBCD):
# JBCD applies the Creative Commons Attribution (CC BY) license to articles and other works we publish. If you submit your paper for publication by JBCD, you agree to have the CC BY license applied to your work. Under this Open Access license, you as the author agree that anyone can reuse your article in whole or part for any purpose, for free, even for commercial purposes. Anyone may copy, distribute, or reuse the content as long as the author and original source are properly cited. This facilitates freedom in re-use and also ensures that JBCD content can be mined without barriers for the needs of research.
# If your manuscript contains content such as photos, images, figures, tables, audio files, videos, etc., that you or your co-authors do not own, we will require you to provide us with proof that the owner of that content (a) has given you written permission to use it, and (b) has approved of the CC BY license being applied to their content. We provide a form you can use to ask for and obtain permission from the owner. If you do not have owner permission, we will ask you to remove that content and/or replace it with other content that you own or have such permission to use.Don't assume that you can use any content you find on the Internet, or that the content is fair game just because it isn't clear who the owner is or what license applies.
# Many authors assume that if they previously published a paper through another publisher, they own the rights to that content and they can freely use that content in their paper, but that’s not necessarily the case, it depends on the license that covers the other paper. Some publishers allow free and unrestricted re-use of article content they own, such as under the CC BY license. Other publishers use licenses that allow re-use only if the same license is applied by the person or publisher re-using the content. If the paper was published under a CC BY license or another license that allows free and unrestricted use, you may use the content in your JBCD paper provided that you give proper attribution, as explained above.If the content was published under a more restrictive license, you must ascertain what rights you have under that license. At a minimum, review the license to make sure you can use the content. Contact that JBCD if you have any questions about the license. If the license does not permit you to use the content in a paper that will be covered by an unrestricted license, you must obtain written permission from the publisher to use the content in your JBCD paper. Please do not include any content in your JBCD paper which you do not have rights to use, and always give proper attribution.
# If any relevant accompanying data is submitted to repositories with stated licensing policies, the policies should not be more restrictive than CC BY.
# JBCD reserves the right to remove any photos, captures, images, figures, tables, illustrations, audio and video files, and the like, from any paper, whether before or after publication, if we have reason to believe that the content was included in your paper without permission from the owner of the content.
How to Cite
References
Younes SA. Maxillary arch dimensions in Saudi and Egyptian population sample. Am J Orthod. 1984;85:83-8.
Simon B, Aschheim K, Vág J. The discriminative potential of palatal geometric analysis for sex discrimination and human identification. J Forensic Sci. 2022;67:2334-42.
Lione R, Buongiorno M, Franchi L, Cozza P. Evaluation of maxillary arch dimensions and palatal morphology in mouth-breathing children by using digital dental casts. Int J Pediatr Otorhinolaryngol. 2014;78:91-5.
Kattimani PT, Shah T, Pareek V, Parmar PM, Nigam H, Shah P. A Comparative Study of Palatal Shapes And Flexural Properties of Edentulous Maxillary Conventional Heat Polymerised Acrylic Resin Denture Bases With Glass Fibre / Metal Mesh Reinforced. 2019;18:51-70.
Avci M, Iplikçioğlu H. An analysis of edentulous maxillary arch width and palatal height. Int J Prosthodont. 1992;5:73-7.
Lynde TA, Unger JW. Preparation of the denture-bearing area--an essential component of successful complete-denture treatment. Quintessence Int. 1995;26:689-95.
Luthra SP. Measurement of the area of the maxillary basal seat for dentures. J Prosthet Dent. 1973;30:25-7.
Johnson DL, Holt RA, Duncanson MG. Contours of the edentulous palate. J Am Dent Assoc. 1986;113:35-40.
Hassanali J, Mwaniki D. Palatal analysis and osteology of the hard palate of the Kenyan African skulls. Anat Rec. 1984;209:273-80.
Indiarti IS, Setyanto DB, Kusumaningrum A, Budiardjo SB. Changes in the palatal dimensions of mouth breathing children caused by nasal obstruction. In: Journal of Physics: Conference Series. Vol 884. Institute of Physics Publishing; 2017.
Rakosi T, Jonas I, Garber T. Color Atlas of Dental Medicine- Orthodontic Diagnosis. 1st ed. Thieme Medical Publishers; 1993.
McCartney JW. Flange adaptation discrepancy, palatal base distortion, and induced malocclusion caused by processing acrylic resin maxillary complete dentures. J Prosthet Dent. 1984;52:545-53.
Rosa GD, De Araújo MF, Aguiar LS, Beghini M, Juliano GR, da Fonseca Ferraz ML, et al. Computerized morphometry of the area of the hard palate and of palatal rugae: a cross-sectional study. Med Leg Costa Rica. 2020;37:154-61.
Muthusubramanian M, Limson KS, Julian R. Analysis of rugae in burn victims and cadavers to simulate rugae identification in cases of incineration and decomposition. J Forensic Odontostomatol. 2005;23:26-9.
Tey SN, Syed Mohamed AM, Marizan Nor M. A morphometric approach to morphology analysis of palatal rugae in sibling groups. J Forensic Sci. 2023;69:189-98.
Hourfar J, Kanavakis G, Bister D, Schätzle M, Awad L, Nienkemper M, et al. Three dimensional anatomical exploration of the anterior hard palate at the level of the third ruga for the placement of mini-implants-a cone-beam CT study. Eur J Orthod. 2015;37:589-95.
Zarb GA, Bolender CL, Hickey JC, Carlsson GE. Boucher's Prosthodontic Treatment for Edentulous Patients. 13th ed. Missouri: Mosby Inc., St. Louis; 2012.
Patil MS, Patil SB, Acharya AB. Palatine rugae and their significance in clinical dentistry: A review of the literature. J Am Dent Assoc. 2008;139:1471-78.
Kumar G, Dhanapal R, Saraswathi T, Bharath S. Sex determination by discriminant function analysis of palatal rugae from a population of coastal Andhra. J Forensic Dent Sci. 2011;3:58-62.
Sharma P, Gupta N, Saxena S. Experimental studies of forensic odontology to aid in the identification process. J Forensic Dent Sci. 2010;2:69-76.
Husein HA, Morad ML, Kanout S. Accuracy of Conventional and Digital Methods of Obtaining Full-Arch Dental Impression (In Vitro Study). Cureus. 2022;14:e29055.
Grave AMH, Becker PJ. Evaluation of the incisive papilla as a guide to anterior tooth position. J Prosthet Dent. 1987;57:712-14.
Namano S, Komin O. The Patient's Denture Assessment (Thai version) is a valid and reliable tool for evaluating the outcome of treatment with complete denture. BMC Oral Health. 2021;21(1):56.
Shailaja A, Umme Romana I, Narayanappa G, Smitha T, Gowda N, Vedavathi H. Assessment of palatal rugae pattern and its significance in orthodontics and forensic odontology. J Oral Maxillofac Pathol. 2018;22:430-35.
Schneider CA, Rasband WS, Eliceiri KW. NIH Image to ImageJ: 25 years of image analysis. Nat Methods. 2012;9:671-75.
Manjunath TH, Kuppast NC, Shahina, Umesh SR, Iddalgave S. Identification of gender from dimensions of palate. Medico-Legal Updat. 2014;14:132-34.
Jacobson TE, Krol AJ. A contemporary review of the factors involved in complete denture retention, stability, and support. Part I: Retention. J Prosthet Dent. 1983;49:5-15.
Kazanje M, Noori S. Measurement of the Palatal Depth for Completely Edentulous Patient. Al-Rafidain Dent J. 2008;8:23-5.
Nomura M, Kano M, Motegi E, Fuma A, Mizuno H, Okano S, et al. Model analysis in "8020" achievers using three-dimensional images. Bull Tokyo Dent Coll. 2013;54:223-32.
Carlsson GE, Ragnarson N, Astrand P. Changes in height of the alveolar process in edentulous segments. A longitudinal clinical and radiographic study of full upper denture cases with residual lower anteriors. Odontol Tidskr . 1967;75:193-208.
Canger EM, Çelenk P. Radiographic evaluation of alveolar ridge heights of dentate and edentulous patients. Gerodontology. 2012;29:17-23.
Atwood DA. Some clinical factors related to rate of resorption of residual ridges. J Prosthet Dent. 1962;12:441-50.
Watt DM, MacGregor AR. Designing complete dentures. 2nd edn. Bristol: IOP Publishing Ltd, 1986.
Józefowicz W. Przyrzad do mierzenia grubości tkanek miekkich pokrywajacych bezzebne wyrostki zebodołowe. Protet Stomatol. 1967;10:19-22. (Polish).
Kurabeishi H, Tatsuo R, Makoto N, Kazunori F. Relationship between tongue pressure and maxillofacial morphology in Japanese children based on skeletal classification. J Oral Rehabil. 2018;45:684-91.
Kumar G, Dhanapal R, Saraswathi T, Bharath S. Sex determination by discriminant function analysis of palatal rugae from a population of coastal Andhra. J Forensic Dent Sci. 2011;3:58-62.
Dwivedi N, Nagarajappa AK. Morphological analysis of palatal rugae pattern in central Indian population. J Int Soc Prev Community Dent. 2016;6:417-22.
Dohke M, Osato S. Morphological study of the palatal rugae in JapaneseI. Bilateral differences in the regressive evolution of the palatal rugae. Jpn JOral Biol. 1994;36:126-40.
Hardiya S, Kumar GJ, Sai MV, Rana K, Desai D, Kaur G. Evaluation of the denture impact on the palatal rugae: An original research. J Pharm Bioallied Sci. 2023;15:224-29.
Shin SY, Kim TH. Correlation between the size of the incisive papilla and the distance from the incisive papilla to the maxillary anterior teeth. J Dent Sci. 2016;11:141-45.