Surface Characterization of PEKK Modified by stron-tium–hydroxyapatite coating as implant material Via the magnetron sputtering Deposition technique
Main Article Content
Abstract
Background: The best material for dental implants is polyetherketoneketone (PEKK). However, this substance is neither osteoinductive nor osteoconductive, preventing direct bone apposition. Modifying the PEKK with bioactive elements like strontium hydroxyapatite is one method to overcome this (Sr-HA). Due to the technique's capacity to provide better control over the coating's properties, RF magnetron sputtering has been found to be a particularly useful technique for deposition.
Materials and methods : With specific sputtering conditions, the RF magnetron technique was employed to provide a homogeneous and thin coating on Polyetherketoneketone substrates.. the coatings were characterized by Contact angle, adhesion test, X-ray diffraction (XRD), atomic force microscope and Elemental Analysis with Energy Dispersive X-Ray (EDX)
Results : indicated that strontium hydroxyapatite had successfully deposited onto the surface with significant improvement in the wettability value to provide a suitable environment for cell attachment, spreading, proliferation, and differentiation
Conclusion: Coating PEKK with RF magnetron sputtering can provide homogeneous surfaces laying the groundwork for improving PEKK's potential bioactivity, such as surface wettability. Wetting qualities are critical in implantable materials and are used to predict future osseointegration success.
Downloads
Article Details
Issue
Section
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licenses and Copyright
The following policy applies in The Journal of Baghdad College of Dentistry (JBCD):
# JBCD applies the Creative Commons Attribution (CC BY) license to articles and other works we publish. If you submit your paper for publication by JBCD, you agree to have the CC BY license applied to your work. Under this Open Access license, you as the author agree that anyone can reuse your article in whole or part for any purpose, for free, even for commercial purposes. Anyone may copy, distribute, or reuse the content as long as the author and original source are properly cited. This facilitates freedom in re-use and also ensures that JBCD content can be mined without barriers for the needs of research.
# If your manuscript contains content such as photos, images, figures, tables, audio files, videos, etc., that you or your co-authors do not own, we will require you to provide us with proof that the owner of that content (a) has given you written permission to use it, and (b) has approved of the CC BY license being applied to their content. We provide a form you can use to ask for and obtain permission from the owner. If you do not have owner permission, we will ask you to remove that content and/or replace it with other content that you own or have such permission to use.Don't assume that you can use any content you find on the Internet, or that the content is fair game just because it isn't clear who the owner is or what license applies.
# Many authors assume that if they previously published a paper through another publisher, they own the rights to that content and they can freely use that content in their paper, but that’s not necessarily the case, it depends on the license that covers the other paper. Some publishers allow free and unrestricted re-use of article content they own, such as under the CC BY license. Other publishers use licenses that allow re-use only if the same license is applied by the person or publisher re-using the content. If the paper was published under a CC BY license or another license that allows free and unrestricted use, you may use the content in your JBCD paper provided that you give proper attribution, as explained above.If the content was published under a more restrictive license, you must ascertain what rights you have under that license. At a minimum, review the license to make sure you can use the content. Contact that JBCD if you have any questions about the license. If the license does not permit you to use the content in a paper that will be covered by an unrestricted license, you must obtain written permission from the publisher to use the content in your JBCD paper. Please do not include any content in your JBCD paper which you do not have rights to use, and always give proper attribution.
# If any relevant accompanying data is submitted to repositories with stated licensing policies, the policies should not be more restrictive than CC BY.
# JBCD reserves the right to remove any photos, captures, images, figures, tables, illustrations, audio and video files, and the like, from any paper, whether before or after publication, if we have reason to believe that the content was included in your paper without permission from the owner of the content.
How to Cite
References
Gowd MS, Shankar T, Ranjan R and Singh A. Prosthetic consideration in implant-supported prosthesis: A review of literature. J Int Soc Prev Community Dent. 2017;7:S1.
Jokstad A, Braegger U, Brunski JB, Carr AB, Naert I and Wennerberg A. Quality of dental implants. Int. Dent. J. 2003;53:409-443.
Jung U-W, Hwang J-W, Choi D-Y, Hu K-S, Kwon M-K, Choi S-H and Kim H-J. Surface characteristics of a novel hydroxyapatite-coated dental implant. J. Periodontal Implant Sci 2012;42:59-63.
Dominici F. Study and characterization of thermo-mechanical properties of fiber-reinforced and nano-structured composites based on engineering and high performance polymeric matrices for high temperature applications. 2017.
Mills N, Jenkins M and Kukureka S. Plastics: microstructure and engineering applications: Butterworth-Heinemann; 2020.
Kemmish DJ. Practical guide to high performance engineering plastics: Smithers Rapra; 2011.
Alqurashi H, Khurshid Z, Syed AUY, Habib SR, Rokaya D and Zafar MS. Polyetherketoneketone (PEKK): An emerging biomaterial for oral implants and dental prostheses. J. Adv. Res. 2021;28:87-95.
Ni G, Lu W, Chiu K, Li Z, Fong D and Luk K. Strontium‐containing hydroxyapatite (Sr‐HA) bioactive cement for primary hip replacement: An in vivo study. J. Biomed. Mater. Res. Part B: Applied Biomaterials: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials. 2006;77:409-415.
Boyd AR, Rutledge L, Randolph L, Mutreja I and Meenan BJ. The deposition of strontium-substituted hydroxyapatite coatings. J. Mater. Sci.: Mater. Med.. 2015;26:65.
Kelly P and Bradley J. Pulsed magnetron sputtering-process overview and applications. J. Optoelectron. Adv. Mater.. 2009;11:1101-1107.
Mezger P and Creugers N. Titanium nitride coatings in clinical dentistry. J. Dent. 1992;20:342-344.
Boonyawan D, Waruriya P and Suttiat K. Characterization of titanium nitride–hydroxyapatite on PEEK for dental implants by co-axis target magnetron sputtering. Surf. Coat. Technol. 2016;306:164-170.
Denry I, Holloway J and Gupta P. Effect of crystallization heat treatment on the microstructure of niobium‐doped fluorapatite glass‐ceramics. J. Biomed. Mater. Res. Part B: Applied Biomaterials. 2012;100:1198-1205.
Zhong W, Huang Y, Gan D, Xu J, Li H, Wang G, Meng S and Chen X. Wetting behavior of water on silicon carbide polar surfaces. Phys. Chem. Chem. Phys. 2016;18:28033-28039.
Gonzalez P, Serra J, Liste S, Chiussi S, Leon B, Perez-Amor M, Martınez-Fernández J, de Arellano-Lopez A and Varela-Feria F. New biomorphic SiC ceramics coated with bioactive glass for biomedical applications. Biomat. 2003;24:4827-4832.
Zhang P, Zhang Z and Li W. Antibacterial coating incorporating silver nanoparticles by microarc oxidation and ion implantation. J. Nanomater. 2013;2013.
Han X-B, Kannari K and Ye S. In situ surface-enhanced Raman spectroscopy in Li–O2 battery research. Curr. Opin. Electrochem. 2019;17:174-183.
Garcia-Leiner M, Dennies DP and Yardimci A. High Performance Polymers in Additive Manufacturing Processes: Understanding Process, Structure and Property. Microsc. Microanal.2015;21:127-128.
Wang H, Xu M, Zhang W, Kwok DT, Jiang J, Wu Z and Chu PK. Mechanical and biological characteristics of diamond-like carbon coated poly aryl-ether-ether-ketone. Biomat. 2010;31:8181-8187.
Briem D, Strametz S, Schröoder K, Meenen N, Lehmann W, Linhart W, Ohl A and Rueger J. Response of primary fibroblasts and osteoblasts to plasma treated polyetheretherketone (PEEK) surfaces. J. Mater. Sci.: Mater. Med. 2005;16:671-677.
Noiset O, Schneider Y-J and Marchand-Brynaert J. Fibronectin adsorption or/and covalent grafting on chemically modified PEEK film surfaces. J. Biomat. Sci., Polymer Edition. 1999;10:657-677.
Bodhak S, Bose S and Bandyopadhyay A. Role of surface charge and wettability on early stage mineralization and bone cell–materials interactions of polarized hydroxyapatite. Acta Biomat. 2009;5:2178-2188.
Ruan J-m and Helen GM. Biocompatibility evaluation in vitro. Part I: Morphology expression and proliferation of human and rat osteoblasts on the biomaterials. J. Cent. South Univ. Technol. 2001;8:1-8.
Yuan H, Kurashina K, de Bruijn JD, Li Y, De Groot K and Zhang X. A preliminary study on osteoinduction of two kinds of calcium phosphate ceramics. Biomat. 1999;20:1799-1806.
Thamaraiselvi T and Rajeswari S. Biological evaluation of bioceramic materials-a review. Carbon. 2004;24:172.
Mohseni E, Zalnezhad E and Bushroa AR. Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper. Int J Adhes Adhes. 2014;48:238-257.
Mandracci P, Mussano F, Rivolo P and Carossa S. Surface treatments and functional coatings for biocompatibility improvement and bacterial adhesion reduction in dental implantology. Coat.. 2016;6:7.
Prosolov K, Popova K, Belyavskaya O, Rau J, Gross K, Ubelis A and Sharkeev YP. RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications. Bioact. Mater. 2017;2:170-176.
Majeed A, He J, Jiao L, Zhong X and Sheng Z. Surface properties and biocompatibility of nanostructured TiO 2 film deposited by RF magnetron sputtering. Nanoscale Res. Lett 2015;10:1-9.
Kligman S, Ren Z, Chung C-H, Perillo MA, Chang Y-C, Koo H, Zheng Z and Li C. The impact of dental implant surface modifications on osseointegration and biofilm formation. J J. Clin. Med. 2021;10:1641.
Deng Y, Liu X, Xu A, Wang L, Luo Z, Zheng Y, Deng F, Wei J, Tang Z and Wei S. Effect of surface roughness on osteogenesis in vitro and osseointegration in vivo of carbon fiber-reinforced polyetheretherketone–nanohydroxyapatite composite. Int. J. Nanomedicine 2015;10:1425.
Rong M, Zhou L, Gou Z, Zhu A and Zhou D. The early osseointegration of the laser-treated and acid-etched dental implants surface: an experimental study in rabbits. J Mater Sci Mater Med 2009;20:1721-1728.
Eom T-G, Jeon G-R, Jeong C-M, Kim Y-K, Kim S-G, Cho I-H, Cho Y-S and Oh J-S. Experimental study of bone response to hydroxyapatite coating implants: bone-implant contact and removal torque test. Oral Surg. Oral Med. Oral Pathol. Oral Radiol. 2012;114:411-418.
Kweh S, Khor K and Cheang P. The production and characterization of hydroxyapatite (HA) powders. J. Mater. Process. Technol. 1999;89:373-377.
Abdulmunem MM and Mohammed JA. Immediate Implant Placement in Fresh Extraction Socket. J. Baghdad Coll. Dent . 2016;28:103-110
Jani GH, Al-Ameer SS and Jawad SN. Histological and histomorphometric analysis of strontium chloride coated commercially pure titanium implant compared with hydroxyapatite coating. J. Baghdad Coll. Dent 2015;27:26-31.