Assessment of the correlation between the tensile and diametrical compression strengths of 3D-printed denture base resin reinforced with ZrO2 nanoparticles
Main Article Content
Abstract
Background: The mechanical properties of 3D-printed denture base resins are crucial factors for determining the quality and performance of dentures inside a patient’s mouth. Tensile strength and diametral compressive strength are two properties that could play significant roles in assessing the suitability of a material. Although they measure different aspects of material behavior, a conceptual link exists between them in terms of overall material strength and resilience. Aim: This study aims to investigate the correlation between tensile strength and diametral compressive strength after incorporating 2% ZrO2 nanoparticles (NPs) by weight into 3D-printed denture base resin. Methods: A total of 40 specimens (20 dumbbell-shaped and 20 disc-shaped) were produced via 3D printing and divided into two groups (n = 10): (1) 3D-printed denture base resin without NPs and (2) the resin was strengthened with 2% by weight ZrO2 NPs. Tensile strength and diametral compressive strength were assessed using a universal testing machine. Results: A detrimental relationship was observed between the tensile strength and diametral compressive strength of 3D-printed denture base resin after the addition of NPs. Conclusion: The enhancement of one property does not necessarily mean the enhancement of another. Caution should be taken to not endanger the quality of a material.
Received date: 03-10-2023
Accepted date: 20-12-2023
Published date: 15-03-2024
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licenses and Copyright
The following policy applies in The Journal of Baghdad College of Dentistry (JBCD):
# JBCD applies the Creative Commons Attribution (CC BY) license to articles and other works we publish. If you submit your paper for publication by JBCD, you agree to have the CC BY license applied to your work. Under this Open Access license, you as the author agree that anyone can reuse your article in whole or part for any purpose, for free, even for commercial purposes. Anyone may copy, distribute, or reuse the content as long as the author and original source are properly cited. This facilitates freedom in re-use and also ensures that JBCD content can be mined without barriers for the needs of research.
# If your manuscript contains content such as photos, images, figures, tables, audio files, videos, etc., that you or your co-authors do not own, we will require you to provide us with proof that the owner of that content (a) has given you written permission to use it, and (b) has approved of the CC BY license being applied to their content. We provide a form you can use to ask for and obtain permission from the owner. If you do not have owner permission, we will ask you to remove that content and/or replace it with other content that you own or have such permission to use.Don't assume that you can use any content you find on the Internet, or that the content is fair game just because it isn't clear who the owner is or what license applies.
# Many authors assume that if they previously published a paper through another publisher, they own the rights to that content and they can freely use that content in their paper, but that’s not necessarily the case, it depends on the license that covers the other paper. Some publishers allow free and unrestricted re-use of article content they own, such as under the CC BY license. Other publishers use licenses that allow re-use only if the same license is applied by the person or publisher re-using the content. If the paper was published under a CC BY license or another license that allows free and unrestricted use, you may use the content in your JBCD paper provided that you give proper attribution, as explained above.If the content was published under a more restrictive license, you must ascertain what rights you have under that license. At a minimum, review the license to make sure you can use the content. Contact that JBCD if you have any questions about the license. If the license does not permit you to use the content in a paper that will be covered by an unrestricted license, you must obtain written permission from the publisher to use the content in your JBCD paper. Please do not include any content in your JBCD paper which you do not have rights to use, and always give proper attribution.
# If any relevant accompanying data is submitted to repositories with stated licensing policies, the policies should not be more restrictive than CC BY.
# JBCD reserves the right to remove any photos, captures, images, figures, tables, illustrations, audio and video files, and the like, from any paper, whether before or after publication, if we have reason to believe that the content was included in your paper without permission from the owner of the content.
How to Cite
Publication Dates
References
Revilla-León, M., Meyers, M. J., Zandinejad, A., Özcan, M. (2019). A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations. Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.], 31(1), 51–57. DOI: https://doi.org/10.1111/jerd.12438
Stögerer, J., Baumgartner, S., Hochwallner, A., Stampfl, J. Bio-Inspired Toughening of Composites in 3D-Printing. Materials 2020; 13(21), 4714. DOI: https://doi.org/10.3390/ma13214714
Zafar M. S. Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update. Polymers 2020;12(10), 2299. DOI: https://doi.org/10.3390/polym12102299
Cai H, Xu X, Lu X, Zhao M, Jia Q, Jiang H-B, Kwon J-S. Dental Materials Applied to 3D and 4D Printing Technologies: A Review. Polymers. 2023; 15(10):2405. DOI: https://doi.org/10.3390/polym15102405
Alshamrani A, Alhotan A, Kelly E, Ellakwa A. Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study. Polymers. 2023; 15(11):2523. DOI: https://doi.org/10.3390/polym15112523
Alqutaibi AY, Baik A, Almuzaini SA, Farghal AE, Alnazzawi AA, Borzangy S, et al. Polymeric Denture Base Materials: A Review. Polymers. 2023; 15(15):3258. DOI: https://doi.org/10.3390/polym15153258
Elfakhri F, Alkahtani R, Li Ch. Khaliq j. Influence of filler characteristics on the performance of dental composites: A comprehensive review. Ceramics International. j. 2022.06.314. DOI: https://doi.org/10.1016/j.ceramint.2022.06.314
Aati, S., Akram, Z., Shrestha, B., Patel, J., Shih, B., Shearston, K., et al. (2022). Effect of post-curing light exposure time on the physico-mechanical properties and cytotoxicity of 3D-printed denture base material. Dent mat 2020;38(1), 57–67. DOI: https://doi.org/10.1016/j.dental.2021.10.011
Alshaikh A, Khattar A, Almindil IA, Alsaif M, Akhtar S, Khan S, et al. 3D-Printed Nanocomposite Denture-Base Resins: Effect of ZrO2 Nanoparticles on the Mechanical and Surface Properties In Vitro. Nanomaterials 2022 Jul 18;12(14):2451. DOI: https://doi.org/10.3390/nano12142451
Fatalla AA, Tukmachi M, Jani Gh. Assessment of some mechanical properties of PMMA/silica/zirconia nanocomposite as a denture base material. IOP Conference Series Mater Sci Eng 2020. DOI: https://doi.org/10.1088/1757-899X/987/1/012031
Mohammed, D, Mudhaffar M. Effect of modified zirconium oxide nano-fillers addition on some properties of heat cure acrylic denture base material. J bagh coll dent 2012; 24, 1-7.SSN: 1817-1869.
Misra A, Sarikaya R. Computational analysis of tensile damage and failure of mineralized tissue assisted with experimental observations. Proc Inst Mech Eng H. 2020 Mar;234(3):289-298. DOI: https://doi.org/10.1177/0954411919870650
Aljafery AM, Hussain BM. Effect of addition ZrO2-Al2O3 nanoparticles mixture on some properties and denture base adaptation of heat cured acrylic resin denture base material. J Bagh Coll Dent 2015 Sep. 15 [cited 2023 Dec. 11];27(3):15-21. DOI: https://doi.org/10.12816/0015028
Al-Hiloh SA, Ismail IJ. A Study the Effect of Addition of Silanized Zirconium Oxide Nanoparticles on Some Properties of High-Impact Heat-Cured Acrylic Resin. J Bagh Coll Dent 2016 Jun. 15 [cited 2023 Dec. 11];28(2):19-25. DOI: https://doi.org/10.12816/0028208
Shigley. Mechanical Engineering Design. 8th Edition, 2008, Pages (231-240).
Perez N, Perez N. Linear-elastic fracture mechanics. Fracture mechanics. 2017:32-34. DOI: https://doi.org/10.1007/978-3-319-24999-5
Craig’s. Restorative Dental Materials. 14th Edition,ELSEVER,2019, pages( 71-72)
Wang L, D'Alpino PH, Lopes LG, Pereira JC. Mechanical properties of dental restorative materials: relative contribution of laboratory tests. J appl oral sci 2003; revista FOB, 11(3), 162–167. DOI: https://doi.org/10.1590/S1678-77572003000300002
Ihab NS, Hassanen KA, Ali NA. Assessment of zirconium oxide nano-fillers incorporation and silanation on impact, tensile strength and color alteration of heat polymerized acrylic resin. J Bagh Coll Dent 2012;24(4):36-42.
Al-Sammraaie M., Fatalla AA. The effect of ZrO2 NPs addition on denture adaptation and diametral compressive strength of 3D printed denture base resin. Nanomed Res J, 2023; 8(4): 345-355.
Craig RG, Powers JM. (2019) Restorative Dental Materials. 14th Edition, Mosby, St. Louis
Gad M, Al-Harbi F, Akhtar S, Fouda S. 3D-Printable Denture Base Resin Containing SiO2 Nanoparticles: An In Vitro Analysis of Mechanical and Surface Properties. J Prosthodont. 2022;31(9):784-790. DOI: https://doi.org/10.1111/jopr.13483
Abdul-Baqi H, Safi I, Nima A, Fatalla AA. Investigating Tensile Bonding and Other Properties of Yttrium Oxide Nanoparticles Impregnated Heat-Cured Soft-Denture Lining Composite In Vitro. J Int Soc Prev Community Dent. 2022 Jan 29;12(1):93-99. DOI: https://doi.org/10.4103/jispcd.JISPCD_274_21
Iwaki M, Kanazawa M, Arakida T, Minakuchi S. Mechanical properties of a polymethyl methacrylate block for CAD/CAM dentures. J Oral Sci. 2020 Sep 26;62(4):420-422. DOI: https://doi.org/10.2334/josnusd.19-0448
Cantrell JT, Rohde S, Damiani D, Gurnani R, DiSandro L, Anton J, et al. Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts. Rapid Prototyping J 2017 Jun 20;23(4):811-24. DOI: https://doi.org/10.1108/RPJ-03-2016-0042
Chen JJ, Guo BQ, Liu HB, Liu H, Chen PW. Dynamic Brazilian test of brittle materials using the split Hopkinson pressure bar and digital image correlation. Strain. 2014 Dec;50(6):563-70. DOI: https://doi.org/10.1111/str.12118
Meng S, He H, Jia Y, Yu P, Huang B, Chen J. Effect of nanoparticles on the mechanical properties of acrylonitrile–butadiene–styrene specimens fabricated by fused deposition modeling. J App Polymer Sci 2017 Feb 15;134(7). DOI: https://doi.org/10.1002/app.44470
Aati S, Akram Z, Ngo H, Fawzy AS. Development of 3D printed resin reinforced with modified ZrO2 nanoparticles for long-term provisional dental restorations. Dent Mater 2021 Jun 1;37(6):e360-74. DOI: https://doi.org/10.1016/j.dental.2021.02.010
Campbell TA, Ivanova OS. 3D printing of multifunctional nanocomposites. Nano Today. 2013 Apr 1;8(2):119-20 DOI: https://doi.org/10.1016/j.nantod.2012.12.002
Goh GD, Yap YL, Agarwala S, Yeong WY. Recent progress in additive manufacturing of fiber reinforced polymer composite. Adv Mater Tech. 2019 Jan;4(1):1800271. DOI: https://doi.org/10.1002/admt.201800271
Altarazi A, Haider J, Alhotan A, Silikas N, Devlin H. Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application. Dent Mater. 2022 Dec;38(12):1841-1854. DOI: https://doi.org/10.1016/j.dental.2022.09.006
Gao X, Qi S, Kuang X, Su Y, Li J, Wang D. Fused filament fabrication of polymer materials: A review of interlayer bond. Additive Manufacturing. 2021 Jan 1;37:101658. DOI: https://doi.org/10.1016/j.addma.2020.101658
Gad MM, Abualsaud R, Rahoma A, Al-Thobity AM, Al-Abidi KS, Akhtar S. Effect of zirconium oxide nanoparticles addition on the optical and tensile properties of polymethyl methacrylate denture base material. International journal of nanomedicine. 2018 Jan 9:283-92. DOI: https://doi.org/10.2147/IJN.S152571
Jasim BS, Alalwan HK, Fatalla AA, Al-Samaray ME. The Impact of Modified Metallic Nanoparticles on Thermomechanical Properties of PMMA Soft Liner. Nano Biomed Eng 2023 Dec 1;15(4). DOI: https://doi.org/10.26599/NBE.2023.9290040
Zohdi N, Tareq S, Yang C. Investigation on mechanical anisotropy of high impact polystyrene fabricated via fused deposition modelling. In1st International Conference on Mechanical and Manufacturing Engineering Research and Practice (iCMMERP-2019) 2019 Nov 24 (Vol. 4, pp. 7-9).
Rybachuk M, Alice Mauger C, Fiedler T, Öchsner A. Anisotropic mechanical properties of fused deposition modeled parts fabricated by using acrylonitrile butadiene styrene polymer. Journal of Polymer Engineering. 2017 Aug 28;37(7):699-706. DOI: https://doi.org/10.1515/polyeng-2016-0263
Levenhagen NP, Dadmun MD. Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products. Polymer. 2018 Sep 12;152:35-41. DOI: https://doi.org/10.1016/j.polymer.2018.01.031